PSL Tile Pavers | Patio, Driveways, Walkways, & More
Transparent Pricing Options
Paver driveways in Port St. Lucie typically run $15 to $30 per square foot depending on material and pattern. Pool deck installations start around $12 per square foot. Every quote breaks down materials, base prep, labor, pattern cuts, and sealing separately.
Design Before Digging
Share photos of your outdoor space and preferred materials before a single paver is ordered. We map out the layout, confirm quantities, and walk through color and finish options so the design is locked before excavation starts.
Florida-grade Materials
Travertine, porcelain, natural slate, brick, and concrete pavers assessed for slip resistance, heat retention, and long-term performance in St. Lucie County’s UV exposure, salt air, and rainy season before any recommendation is made.
Engineered Paver Bases to Prevent Settling
Port St. Lucie’s sandy soil causes uneven settling when base depth is cut short. Every installation uses a compacted crushed stone base to ICPI standards, minimum 4 inches on patios and 6 inches on driveways, with polymeric sand joints throughout.
Decades of Local Experience
Over 20+ years and 1250+ paver installations completed in St. Lucie County. Properly installed and sealed surfaces last 25 to 30 years on average. 9 in 10 restoration clients avoid full replacement after our re-leveling and resealing service.
Building to a Higher Standard
15+ paver material options available. Most residential projects are completed in 2 to 5 days. St. Lucie County permits handled on 100% of driveway and structural installations.
Get a FREE Quote
Residential Paver Installation and Repair Services
Driveway Paver Installation
Concrete and brick pavers are installed over a compacted aggregate base and bedding sand to support vehicle loads. PSL Tile Pavers uses polymeric joint sand and perimeter edge restraints to prevent shifting in Port St. Lucie’s sandy soil.
Patio Paver Installation
Port St. Lucie summer rainstorms require precise slope grading to prevent standing water. We build patio bases with a minimum 1.5% pitch away from home foundations, ensuring positive drainage that protects joint sand and prevents sub-base erosion.
Travertine Patio Paver Installation
We supply and install tumbled, brushed, and honed travertine pavers for Treasure Coast outdoor spaces. Our crew integrates Laticrete waterproofing, Schluter edge profiles, and Techniseal penetrating sealers to protect wet transitions and pool surrounds from salt air.
Sunken Patio Paver Repair
Rising groundwater and sandy soil compaction create sunken low spots on patio surfaces. We lift compromised pavers, excavate settled sub-bases, add compacted aggregate, and reset the field flush to restore consistent surface planes and proper drainage.
Permeable Driveway Paver Installation
Meeting St. Lucie County stormwater guidelines, we install permeable concrete paver systems using open-graded aggregate bases and geotextile fabric. Chip stone joint fill allows rapid surface infiltration, preventing joint sand washout during heavy coastal rainfall events.
Cracked Driveway Paver Repair
Vehicle loads and settlement cause pavers to crack over time. PSL Tile Pavers carries common Treasure Coast paver profiles on-site, allowing us to replace broken units and restore fully interlocked, level driveway surfaces in a single visit.
Indoor and Outdoor Tile Installation Services
Indoor Tile Flooring Installation
Seasonal humidity causes concrete slabs to expand and shift beneath rigid tiles. PSL Tile Pavers installs Schluter DITRA uncoupling membranes beneath interior floor tile, decoupling the tile assembly from slab movement to prevent cracked grout and hollow spots.
Porcelain Floor Tile Installation
We lay rectified, large-format porcelain tile using full-coverage thinset applications that eliminate air pockets beneath high-traffic floors. Our team confirms joint widths, layout patterns, and tile finishes beforehand to match your desired interior design direction.
Natural Stone Tile Installation
Marble, limestone, and travertine receive white polymer-modified thinset to eliminate bleed-through discoloration on light stone surfaces. We pre-seal each tile with penetrating impregnators before grouting, inspecting veining across cartons to guarantee a consistent tone across the floor.
Travertine Tile Installation
Filled and honed travertine tile is laid over full-coverage mortar beds with unsanded grout matched to the stone’s natural tone. This application prevents hollow voids, while penetrating sealers shield against moisture infiltration in humid interior environments.
Bathroom & Shower Tile Installation
Meeting Florida Building Code wet-area rules, we build fully waterproofed shower systems using Schluter KERDI bonded membranes, reinforced corners, and flush-mounted KERDI-DRAIN assemblies. This process protects wall cavities from mold while providing compliant slip-resistant surfaces.
Outdoor Tile Installation
PSL Tile Pavers prepares exterior tile for UV and weather exposure using polymer-modified thinsets, Laticrete epoxy grout, Schluter movement joints, and R11 slip-resistant porcelain tiles rated for wet outdoor environments per Florida Building Code standards.
Pool Deck & Tile Installation, Repair, and Sealing Services
Pool Deck Paver Installation
Our pool deck paver layouts integrate directly with pool safety barriers, gate hardware, and accessible paths. We set travertine or brushed concrete pavers compliant with Florida Building Code R11 slip resistance and local barrier setback rules.
Slip-Resistant Pool Deck Tile Installation
To meet St. Lucie County pool codes, we install outdoor-rated porcelain tiles featuring R11 slip resistance. We use full-coverage thinset to prevent hollow spots and seal joints with Laticrete epoxy grout for maximum chemical resistance.
Pool Deck Drainage & Standing Water Repair
Heavy rainstorms frequently overwhelm undersized pool deck drains. PSL Tile Pavers installs NDS channel drains and pop-up emitters rated for peak rainfall, clearing standing water quickly to protect screen enclosures, equipment pads, and pool coping.
Pool Deck Tile Stained Grout Repair
Sunscreen, pool chemicals, and organic debris penetrate unsealed grout over time. We saw-cut and remove stained grout joints, re-grouting with color-matched Laticrete epoxy grout to restore complete stain, chemical, and UV resistance to your deck.
Concrete Driveway Paver Sealing
We pressure-wash driveways, remove efflorescence, and top off joint sand before applying two coats of water-based acrylic sealer. This service locks joint sand against heavy rain washouts while reviving rich color depth across concrete pavers.
Tile & Grout Sealing Services
Our technicians clean, dry, and apply silane-siloxane penetrating sealers to indoor and outdoor grout lines. For pool decks, we utilize epoxy-modified sealers that shield porous grout against harsh pool water, sunscreen, and organic staining.
Faded Tile & Surface Restoration
When UV exposure leaves outdoor surfaces chalky and discolored, PSL Tile Pavers strips failed coatings with chemical strippers and applies two coats of UV-stable sealer. This restores color depth and waterproofing, extending surface life by years.
Why Choose PSL Tile Pavers
Local Project Planning
We work primarily with Port St. Lucie homeowners and businesses.
Base Done Right
Every installation starts with proper site assessment, grading, and preparation.
No Surprise
Scope and materials are explained in writing before any work begins.
One Contractor, Both Trades
Tile and paver work is handled by the same local team throughout.
Tile and Paver Options for Port St. Lucie Homes and Properties
Tile Options
Porcelain, ceramic, and natural stone each elevate your home with distinct performance benefits.
Dense, low-absorption porcelain provides the ultimate low-maintenance finish for floors, lanais, and wet areas, while large-format ceramic minimizes grout lines.
Natural stone delivers timeless luxury and rich, organic textures.
Paver Options
Hardscapes offer complete design control to transform your outdoor living spaces.
Interlocking concrete pavers provide incredible structural strength and versatile patterns for driveways.
Clay brick delivers fade-proof, classic warmth, while cool-underfoot travertine brings effortless luxury and coastal elegance to pool surrounds.
Process & Timeline for PSL Tile Paver Projects
Site Inspection & Layout Planning (Day 1)
We measure the space, inspect existing subfloors or subgrade, and confirm your material, layout, and joint specifications. We establish clear project timelines before site work begins.
Sub-Base & Surface Preparation (1–2 Days)
For indoor tile, we level subfloors and install waterproofing or uncoupling membranes. For outdoor pavers, we excavate, set crushed aggregate, and compact a properly graded base to ensure proper drainage.
Tile Setting & Paver Installation (1–3 Days)
We lay tile with proper mortar coverage, alignment, and spacing. For pavers, we set your chosen pattern, make precise edge cuts, secure perimeter restraints, and fill joints with joint sand.
Grouting, Sealing & Final Inspection (1–2 Days)
After setting materials cure, we apply grout to tile or penetrating sealer to outdoor pavers. We clean the work area, perform a final walk-through with you, and confirm cure times before opening the surface to foot traffic or vehicle loads.
Timeline for PSL Tile and Paver Projects
The projected timeline varies between projects. On average, it takes 2 to 5 working days for single-room tile installations and 3 to 7 working days for paver patios, driveways, and walkways, depending on site preparation and weather conditions. Most projects are done before the week is out. Reach out today to get yours on the schedule.
How Much Do Tile & Paver Services Cost in Port St. Lucie?
Every project is priced by material, square footage, layout complexity, and site conditions. Base preparation, substrate repairs, drainage work, and equipment access all factor into the final number. The ranges below are planning estimates. The actual quote depends on what the site requires.
Project Type | Typical Range | What Affects the Price |
|---|---|---|
Paver Patio | $10 to $25 per sq ft | Material selection, base depth, drainage |
Paver Driveway | 10-15% Higher than patio | Vehicle-rated base, demolition, drainage, borders |
Interior Tile Floor | $5 to $16 per sq ft | Tile type, layout pattern, substrate condition |
Shower Tile | 10-15% Higher than floor tile | Waterproofing, drain work, corners and fixtures |
Natural Stone or Large Format | Premium over standard tile | Additional leveling, handling, and cut complexity |
When comparing quotes, confirm whether excavation, compacted base, bedding sand, edge restraints, joint sand, substrate repair, waterproofing, grout, trim, and cleanup are included. Those line items change both the price and the quality of what gets installed. We identify every item in writing before any work begins.
What Port St. Lucie’s Climate Does to Tile and Pavers
Soil, Water, and Storm Preparation
Sandy soil shifts under load when moisture levels change through Florida’s wet and dry seasons. Every base starts with unsuitable material removed, subgrade compacted, and an aggregate base sized for the surface type and traffic load.
Where groundwater sits close to the surface or water collects seasonally, finished elevation and drainage are planned before the base is set. During hurricane season, which runs June through November, weather-sensitive work is scheduled around the forecast and unfinished areas are protected when storms approach.
UV Exposure, Salt Air, and Material Selection
Strong Treasure Coast sun degrades unsealed finishes faster than most inland markets, so exterior-rated pavers and tile with UV-stable finishes are specified on every outdoor project. Darker materials are flagged on pool decks and barefoot-traffic areas where heat absorption matters.
Salt air adds corrosion pressure on hardware and sealers, so corrosion-resistant components and manufacturer-approved products are used throughout. On pool decks and uncovered patios, surfaces are specified for wet-foot slip resistance and movement joints are installed wherever thermal expansion requires them
Our Happy Clients in PSL
“Finally a contractor who showed up on time”
We had our backyard patio done last spring and the whole thing went smoother than I expected. They came out, looked at the space, gave us a quote that actually made sense, and showed up on the day they said they would. The travertine pavers look great and nothing has shifted since.
Maria T. — Port St. Lucie, FL · 3 months ago
“Knew what they were doing from the first visit”
I’ve dealt with contractors who show up and figure it out as they go. These guys were different. The guy who came out to estimate actually knew the product, talked me through the base prep they’d need to do because of our soil, and the price didn’t change when they got started. Clean work, no surprises.
James R. — Tradition, FL · 5 months ago
“Pool deck looks brand new”
Our old pool deck was cracked, stained, and embarrassing. PSL Tile Pavers resurfaced the whole thing with new pavers and it looks like a completely different backyard. They were in and out in 3 days and cleaned up after themselves every evening. Neighbors have already asked who we used.
Sandra M. — Stuart, FL · 7 months ago
“Bathroom tile came out exactly how we wanted”
We were nervous about the shower tile because we had a specific pattern in mind and weren’t sure a contractor would take the time to get it right. They did. The grout lines are even, the pattern is centered, and the waterproofing was done properly. No leaks, no issues, and it’s been 8 months.
Derek and Alicia F. — St. Lucie West, FL · 8 months ago
FAQs About Tile and Paver Installation
Single-room tile projects typically take 2 to 5 working days, while paver driveways, patios, and walkways take 3 to 7 working days. Total timelines depend on site excavation, base preparation, and weather conditions.
Foot traffic is generally allowed within 24 hours after grouting or sanding. Vehicle traffic on new paver driveways requires 48 to 72 hours for setting materials, joint sand, and sealers to cure fully.
Your old pavers are sinking because the underlying aggregate base degrades or suffers from improper initial compaction. Florida’s heavy rainstorms and rising groundwater erode unstable subgrade sand, creating low spots and uneven lippage over time.
We recommend sealing outdoor pavers, natural stone, and grout joints every 2 to 3 years. Regular sealing protects against UV breakdown, engine oil stains, algae growth, and joint sand loss caused by coastal summer downpours.
To prevent mold and water damage, we build fully waterproofed shower enclosures using bonded waterproofing membranes over cement backer boards or sloped mortar beds. This creates a watertight barrier behind the tile before we set a single piece.
No, travertine pavers are not slick when used around swimming pools. Unfilled, tumbled, or brushed travertine provides excellent natural slip resistance around swimming pools due to its textured surface and porous structure. Applying a penetrating sealer protects the stone from pool chemicals and moisture without reducing barefoot traction or creating a slippery film.
© 2026 All Rights Reserved | PSL Tile Pavers